+86 187 6563 9190amywang@pipe-corrugator.com
Kontakt
Suba Machinery Logo
ProdukteÜber unsNachrichtenKontakt
Angebot anfordern
!
Suba Machinery
Suba Machinery
Suba Machinery
Suba Machinery
Suba Machinery
Suba Machinery
Qingzhou Suba Machinery Co., Ltd.

Suba Machinery entwickelt und fertigt Doppelwand-Wellrohr-Extrusionsanlagen – von OD40mm Kabelschutz bis ID1600mm Infras...

+86 187 6563 9190amywang@pipe-corrugator.com
Tianqiaosong, Wirtschaftsentwicklungszone Qingzhou, Qingzhou, Shandong, China

Produktionsanlagen

  • SL180
  • SL300
  • SL600
  • SL800
  • SL1000
  • SL1200
  • SL1600

Ausrüstung

  • Extruder
  • Double Layer Die Head
  • Corrugator
  • Mould
  • Cooling Tank
  • Cutter
  • Stacker
  • Double Station Coiler
  • Perforator
  • Conical Twin Screw Extruder
  • Cross Die Head
  • Haul-Off Unit

Über uns

  • Über uns
  • Nachrichten
  • Kontakt

Schnelllinks

  • YouTube

© 2026 SUBA Machinery. Alle Rechte vorbehalten.

Suba Machinery
Suba Machinery
Suba Machinery
Qingzhou Suba Machinery Co., Ltd.

Suba Machinery entwickelt und fertigt Doppelwand-Wellrohr-Extrusionsanlagen – von OD40mm Kabelschutz bis ID1600mm Infras...

+86 187 6563 9190amywang@pipe-corrugator.com
Tianqiaosong, Wirtschaftsentwicklungszone Qingzhou, Qingzhou, Shandong, China

Produktionsanlagen

  • SL180
  • SL300
  • SL600
  • SL800
  • SL1000
  • SL1200
  • SL1600

Ausrüstung

  • Extruder
  • Double Layer Die Head
  • Corrugator
  • Mould
  • Cooling Tank
  • Cutter
  • Stacker
  • Double Station Coiler
  • Perforator
  • Conical Twin Screw Extruder
  • Cross Die Head
  • Haul-Off Unit

Über uns

  • Über uns
  • Nachrichten
  • Kontakt

Schnelllinks

  • YouTube

© 2026 SUBA Machinery. Alle Rechte vorbehalten.

100+ Patente
200+ Gelieferte Anlagen
20+ Jahre Erfahrung
CE-zertifiziert
Suba Machinery
Haul-Off Unit - Automated haul-off unit installed directly upstream of the cut-off saw to provide stable

Haul-Off Unit

Automated haul-off unit installed directly upstream of the cut-off saw to provide stable, continuous take-off of the formed pipe. Engineered for the strict synchronization demands of high-speed extrusion lines, it minimizes scrap during start-up and format changeovers and lowers total cost of ownership (TCO) for a fast return on investment (ROI).

  • Dynamic synchronization: haul-off speed adjusts automatically to the corrugator's pace, preventing deformation and jamming of the hot profile.
  • Universal range: traction element parameters fully match the working diameter range of the paired corrugator.
  • Precise geometry adaptation: smooth height adjustment for exact coaxial alignment with the extrusion axis.
  • Output metering: an electronic length counter is integrated as standard to track production volume.
  • Modular and customizable: an optional high-speed scrap-free cutting unit (flying knife / saw) can be fitted.

Unsere Spezialisten melden sich innerhalb von 24 Stunden bei Ihnen

Technische Spezifikationen nach Linie

Haul-Off Unit-Varianten in verschiedenen Produktionslinien und Rohrdurchmessern

LinieKonfigurationRohrdurchmesser
SL300SL300 Haul-offID100–OD315
SL600SL600 Haul-offID100–OD630

Benötigen Sie Komponenten-Spezifikationen?

Kontaktieren Sie uns für detaillierte Spezifikationen, Preise und Konfigurationsoptionen für die Haul-Off Unit.

WhatsApp: +86 187 6563 9190amywang@pipe-corrugator.com
Angebot anfordern

Eingesetzt in Produktionsanlagen

Diese Komponente ist Bestandteil der folgenden Suba Machinery Produktionsanlagen-Konfigurationen

Suba Machinery
SL300 Wellrohr-Extrusionsanlage
SL300ID100–OD315

SL300 Wellrohr-Extrusionsanlage

Die SL300-Linie produziert ID90mm–ID300mm HDPE/PP Doppelwand-Wellrohre mit horizontaler Struktur, Wasserkühlungs- und Extrusionstechnologie für Hochgeschwindigkeitsproduktion.

6 MerkmaleDetails ansehen
Suba Machinery
SL600 Wellrohr-Extrusionsanlage
SL600ID100–OD630

SL600 Wellrohr-Extrusionsanlage

Die SL600-Linie produziert ID90mm–ID600mm HDPE/PP Doppelwand-Wellrohre mit horizontaler Struktur, Wasserkühlung und Extrusionstechnologie für Hochgeschwindigkeitsproduktion.

6 MerkmaleDetails ansehen
Alle ansehen

Ausrüstung

Wesentliche Komponenten für Ihre Wellrohr-Produktionsanlage. Einzelne Upgrades, Ersatzteile und kundenspezifische Konfigurationen verfügbar.

Suba Machinery
Extruder

Extruder

Suba machinery corrugated pipe extrusion line includes automatic feeding system and hopper with drying function. The developed SJ65, SJ75, SJ90, SJ120, SJ150 extruders use a buffering mixing section and large L/D ratio screws, which has a good plasticization, high output and wide adaptability to raw materials; the feeding section with a spiral buffer design, direct water cooling and automatic temperature control system, which can increase the conveying efficiency at the feeding end. Bimetallic screw and barrel effectively improve the wear resistance and corrosion resistance, service life is increased by 2-3 times; Extruder is equipped with a fine-tuning base to make sure a better connection with the die head; Gearbox adopts vertical structure which achieves compact structure, low noise index, strong carrying capacity and high transmission efficiency; The optimized co-extrusion system of multiple extruders achieves optimal matching production of various specifications. The production of small sized products does not cause waste of the extrusion system, and the production of large sized products has sufficient output.

2 featuresDetails ansehen
Suba Machinery
Double Layer Die Head

Double Layer Die Head

The blank is extruded from the extruder through the inner and outer die of the double layer pipe die head. Double layer pipe die head is suitable for HDPE and PP materials. Die head is fixed on the die head bracket, and die head replacement is simple and quick. Suba die head short channel design (shorten about 25%), effectively lower down the melt pressure, achieves low temperature low pressure extrusion, production efficiency increases 25%; The low extrusion melt pressure reduces requirement of parts, the material leakage risk at the connection is greatly reduced. The double channel starts from the die head body and reaches the die exit, it achieves multi extruders extrude two layers. The optimized design of double layer pipe die head, the inner and outer wall thickness adjustment is very stable and convenient, which achieves dynamic adjustment, no need to stop extruders, no need to loosen any fastening screws, shorten adjustment time and reduce the material leakage risk.

2 featuresDetails ansehen
Suba Machinery
Corrugator

Corrugator

The innovative corrugator of Suba machinery corrugated pipe extrusion line adopts a horizontal water cooling structure. The vacuum and inflation technology work together to ensure the rapid pipe forming. The center height of different sizes is consistent; Changing sizes only need to replace moulds, no need to adjust the corrugator platform. Patented closed loop water cooling system; Moulds replacement only by loosening or tightening the screws and turning the eccentric disk, there is no any water tubes connected to the moulds, moulds replacement no need to plug and unplug the water tube, 50% time saving for sizes replacement. Corrugator left and right racks are electrically opened and closed freely, which is convenient for equipment inspection and maintenance, and the equipment structure is more stable and easier to operate. Patented mould cooling system, one end of the hose runs continuously and synchronously with the moulds, the other end rotates around the fixed axis. The optimized mould cooling system ensures that the inertia impact of the equipment is minimized, which is especially suitable for high speed production and ensures a longer service life. The length of the moulds cooling water inlet and outlet tube is no longer limited by the specification of moulds, the inlet and outlet tubes are arranged more closely, which avoid equipment damage and the water leakage risk caused by tubes stuck between adjacent moulds.

3 featuresDetails ansehen
Alle ansehen

Bereit für den Produktionsstart?

Kontaktieren Sie uns für eine kostenlose Beratung und ein Angebot

Kostenlose technische Beratung
Ingenieure 24/7 erreichbar
Antwort innerhalb von 24 Stunden
Qingzhou Suba Machinery Co., Ltd.

Suba Machinery entwickelt und fertigt Doppelwand-Wellrohr-Extrusionsanlagen – von OD40mm Kabelschutz bis ID1600mm Infras...

+86 187 6563 9190amywang@pipe-corrugator.com
Tianqiaosong, Wirtschaftsentwicklungszone Qingzhou, Qingzhou, Shandong, China

Produktionsanlagen

  • SL180
  • SL300
  • SL600
  • SL800
  • SL1000
  • SL1200
  • SL1600

Ausrüstung

  • Extruder
  • Double Layer Die Head
  • Corrugator
  • Mould
  • Cooling Tank
  • Cutter
  • Stacker
  • Double Station Coiler
  • Perforator
  • Conical Twin Screw Extruder
  • Cross Die Head
  • Haul-Off Unit

Über uns

  • Über uns
  • Nachrichten
  • Kontakt

Schnelllinks

  • YouTube

© 2026 SUBA Machinery. Alle Rechte vorbehalten.